Hello Guest it is January 15, 2025, 11:34:39 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Spindle control  (Read 3774 times)

0 Members and 1 Guest are viewing this topic.

Offline tivoi

*
  • 29 29
Spindle control
« on: January 19, 2008, 12:29:51 AM »
How to setting mach 3 control spindle just on and off? thanks for your help
Logged

Offline stirling

*
  • *
  • 2,188 2,188
  • UK
    • www.razordance.co.uk
Re: Spindle control
« Reply #1 on: January 19, 2008, 05:13:04 AM »
Hi tivoi
config / ports & pins / outputs - choose an output pin. e.g. 1
config / ports & pins / Spindle setup - Clockwise M3 output # - set to 1
wire pin 1 to your relay control
you can now turn on with M3 and off with M5.
Logged

Offline tivoi

*
  • 29 29
Re: Spindle control
« Reply #2 on: January 19, 2008, 05:18:54 AM »
thanks stirling, i'll try.

thanks again
Logged
Pages: 1   Go Up
« previous next »