Author Topic: view Gcode filename with brain  (Read 2235 times)

0 Members and 1 Guest are viewing this topic.

Offline carlo

  • Active Member
  • Posts: 7
    • View Profile
view Gcode filename with brain
« on: January 09, 2008, 08:41:52 AM »
Hi,
I have tried to load a Gcode file into the Mach with BRAIN and PLC input it was successful.
My question is: is there any chance to view the Gcode filename on the PLC(modbus) or  touchscreen(modbus).

Thank you
Carlo