Hello Guest it is March 29, 2024, 04:50:23 AM

Author Topic: R3.00 Auto Limit Override?  (Read 3665 times)

0 Members and 1 Guest are viewing this topic.

R3.00 Auto Limit Override?
« on: January 09, 2008, 10:02:57 AM »
Hi -

I'm a new Mach3 user (version R3.00).  I've been setting up limit/home switches on my X2 mill - when I jog to a limit and trip the switch, motion stops as expected.  However I can't jog off the switch.  There is supposed to be a "Auto Limit Override" checkbox in the General Config page but for the life of me, I can't find it.  Can I get a clue please?  :)

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: R3.00 Auto Limit Override?
« Reply #1 on: January 09, 2008, 10:09:36 AM »
Have a look on the settings page, used to be ther anyway.
Hood

Offline TonyP

*
  •  132 132
    • View Profile
Re: R3.00 Auto Limit Override?
« Reply #2 on: January 09, 2008, 03:39:06 PM »
In Turn it's in the diagnostics screen just looked at Mill & its on the top left hand side of the Settings screen.


Tony
« Last Edit: January 09, 2008, 03:50:35 PM by TonyP »
Re: R3.00 Auto Limit Override?
« Reply #3 on: January 09, 2008, 05:00:42 PM »
Thank you! I found it and the Override Limits selection in the Settings screen.
Have to work out some issues with the CNC4PC breakout board bit otherwise the system is running great!