Hello Guest it is March 29, 2024, 09:22:59 AM

Author Topic: From 3D to final part  (Read 3373 times)

0 Members and 1 Guest are viewing this topic.

From 3D to final part
« on: January 06, 2008, 06:49:49 AM »
Hi,

Over the last 8 months I learned how to produce a part:

- How to modify an Optimum Opti BF20 L mill
- How to build the stepper electronics
- How to work with Pro-Engineer to design the part
- How to use Cut3D from Vectric to convert the part in G-code
- How to mill a double sided job with Mach3

I made a lot of mistakes during this process and I'm still making mistakes but I wrote down the final "how to" on my site so that others may make less mistakes....

http://www.animalrobots.eu/?page_id=4

Jan
« Last Edit: January 19, 2008, 10:48:17 AM by jkamer »