Hello Guest it is March 29, 2024, 07:56:33 AM

Author Topic: Can't post G-code  (Read 4527 times)

0 Members and 1 Guest are viewing this topic.

Can't post G-code
« on: January 07, 2008, 12:16:21 AM »
I have tried with a number of files and can't get it to post the code.
Says it does but no file appears :(

Here is one of the files I am trying.

Offline Ben

*
  •  79 79
    • View Profile
Re: Can't post G-code
« Reply #1 on: January 07, 2008, 08:49:18 AM »
I,m no expert so I'll tell you everything I know. In lazycam click "setup" then "Posting options" then as below. Good luck, Ben
Re: Can't post G-code
« Reply #2 on: January 07, 2008, 03:08:35 PM »
Thanks Ben, thats exactly what I have done and no luck at all.
It says it does it but nothing ever gets posted or any file created.

Offline Ben

*
  •  79 79
    • View Profile
Re: Can't post G-code
« Reply #3 on: January 07, 2008, 05:33:42 PM »
I drew a curve using Bezier lines and LC wouldn't produce a gcode file. I did the same using a polyline and it worked fine. So redraw your DXF file and see if that works. Ben

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Can't post G-code
« Reply #4 on: January 07, 2008, 06:54:29 PM »
Hi, Noto

I tried your file, It, posted ok with and with ought a LC Pro Lic.

Try re-downloading LC again, Hears a post of it.

Thanks, Chip

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Can't post G-code
« Reply #5 on: January 07, 2008, 08:06:25 PM »
What does it say in your gcode file option?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Can't post G-code
« Reply #6 on: January 07, 2008, 08:29:16 PM »
Brett, It looks exactly like Bens screenshot.

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Can't post G-code
« Reply #7 on: January 07, 2008, 08:40:14 PM »
I have sent you a personal message.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Can't post G-code
« Reply #8 on: January 07, 2008, 10:15:03 PM »
Replied :)