Hello Guest it is June 17, 2019, 01:38:37 AM

Author Topic: Eureka I'm Cutting  (Read 2128 times)

0 Members and 1 Guest are viewing this topic.

Eureka I'm Cutting
« on: April 18, 2006, 08:45:26 PM »
I have finally cut my first chips. I have got to give Brian Barker my deepest appreciation and gratitude for his help in configuring my machine in Mach 3. It has been almost 1 year since I purchased my machine and Mach Control Software. I know many of you have read My 2 Cents post and know I just got in over my head. This forum and it's members have been supportive and very helpfull to me in a one to one spirit Once again THANK YOU BRIAN.
Re: Eureka I'm Cutting
« Reply #1 on: April 19, 2006, 08:03:04 AM »
Great I am happy to see that you are happy and making chips  ;D

Happy cutting!
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

ynneb

*
Re: Eureka I'm Cutting
« Reply #2 on: April 19, 2006, 09:08:16 AM »
Post a picture of some of your first cuts.

Yeh, we would be quite lost without Brians help here.