Hello Guest it is March 29, 2024, 01:33:17 AM

Author Topic: Entering HotKey numbers  (Read 3456 times)

0 Members and 1 Guest are viewing this topic.

Entering HotKey numbers
« on: November 25, 2007, 12:30:57 PM »
Hi All,

I use Mach3Turn V2.6 and  in   Engineconfiguration- Inputsignals,  i am trying to enter a Hotkeynumber

When i do, i get a Popupscreen witch tells me to hit a Key.

What i want is, just to  enter a number like 1000 or 1003 etc; this seems to be unable.

Can anyone tell me what i am doing wrong???

Thanks

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Entering HotKey numbers
« Reply #1 on: November 25, 2007, 01:01:18 PM »
Hi, Dikkieduk

It's set up for key #'s, Shift  P = 1104, Ctrl Shift P = 33872 (Keyboard Scan codes), to re-zero click on the Hotkey and click on the close window X.

Hope this Helps, Chip
Re: Entering HotKey numbers
« Reply #2 on: November 25, 2007, 01:37:19 PM »
Thanks for your help Chip ,

But i should have told you ,that i've been trying to set up
some external pushbuttons like start-stop etc.
 

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Entering HotKey numbers
« Reply #3 on: November 25, 2007, 02:43:15 PM »
Hi, Dikkieduk

Look at Config, "System Hotkeys", Enter Trigger#, Then OemCode for "Start", Then in Ports & Pins, Inputs, Trigger# set to port and pin.

You could use Brain's, Operator, "Brain Editor" to do it, Configure an input in Ports & Pins, Input # to your external button.

Then Brain Editor, Look at the video's on Brain's Above under "Tutorials".

Describe your setup a little more, Well help if needed.

Many ways to do it, Let US now.

Thanks, Chip
« Last Edit: November 25, 2007, 03:10:31 PM by afn09556 »
Re: Entering HotKey numbers
« Reply #4 on: November 26, 2007, 05:27:34 AM »
Thanks Chip , working fine now.