Hello Guest it is March 28, 2024, 07:54:08 PM

Author Topic: feedrate override doesn't take effect?  (Read 2779 times)

0 Members and 1 Guest are viewing this topic.

feedrate override doesn't take effect?
« on: November 13, 2007, 03:35:20 PM »
hello everybody.
I'm using mach3 with grex g100 and I'm facing the following problem:
the feedrate override doesn't take effect while the cycle is started
only take effect after pressing (feed hold) and then (cycle start) buttons

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: feedrate override doesn't take effect?
« Reply #1 on: November 14, 2007, 08:16:44 AM »
Try redownloading and reinstalling the plug-in. Also make sue that no FRO on que isn't checked in general config. Let me know if this fixes it or not. I haven't got to play with the rex in a while and I won't get to any time soon.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!