Hello Guest it is January 17, 2022, 05:12:01 AM

Author Topic: Front side turning  (Read 4324 times)

0 Members and 1 Guest are viewing this topic.

Front side turning
« on: June 01, 2007, 05:33:45 AM »
Hi Art and Brian

Is there a chance you can spend a little bit attention on front side turning.
I find it diffecult to make a shape on the front side of the material.

Greetings:
Willem
Re: Front side turning
« Reply #1 on: June 01, 2007, 05:21:42 PM »
it should not matter... -X is into the stock...
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Front side turning
« Reply #2 on: June 02, 2007, 06:01:22 AM »
Hi Brian

Sorry i don't understand.
Maybe i did not expres myself clear i have a drawing attached with a frontview (yellow line's).
The inside is no problem , the outside is also no problem but i do not see how to make this shape on the front.

Greetings:
Willem
« Last Edit: June 02, 2007, 06:30:20 AM by W.Jansen »
Re: Front side turning
« Reply #3 on: June 02, 2007, 09:31:56 AM »
I see :)

That is on the list  8)

I hope we can get to it soon
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Front side turning
« Reply #4 on: June 02, 2007, 09:53:42 AM »
Thanks Brian

Would be nice.

Greetings:
Willem
Re: Front side turning
« Reply #5 on: October 23, 2007, 09:31:09 AM »
Hi Brian

Is it still on the list?

Thanks and greeting:
W.Jansen
« Last Edit: October 30, 2007, 10:24:09 AM by W.Jansen »
Re: Front side turning
« Reply #6 on: November 11, 2007, 09:04:46 AM »
It is on the List but that is not a simple thing to do... I will have to talk to Art about the pocketing code and see if there is a way to get it to output the correct Path for the front...


thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Front side turning
« Reply #7 on: November 11, 2007, 10:42:03 AM »
Hi Brian

I can imagine that it is a difficult question (not the question but the solution).
I appreciate your effort in this.
To me it would be a great progression in Lazycam if it would be possible.

Greetings:
Willem