Hello Guest it is July 20, 2019, 11:13:35 PM

Author Topic: Change speed with butons (not mouse)  (Read 2139 times)

0 Members and 1 Guest are viewing this topic.

Offline cnc-project

*
  •  9 9
  • moja mala beba
    • View Profile
    • www.cnc-project.com
Change speed with butons (not mouse)
« on: February 03, 2009, 12:15:13 AM »
Can do some with screen designer , and set two buttons for change speed in work ?

The best solution is & mouse & buttons ( +,-  ...?)

Thanks

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Change speed with butons (not mouse)
« Reply #1 on: February 03, 2009, 03:03:07 AM »
Yes, you can place buttons on the screen to do that, the OEM codes for the buttons are 108 to increase Feed, 109 to decrease and 1014 to reset.
You can also have physical buttons on a panel if you wish (and have enough inputs) just set them as OEM triggers then in System Hotkeys enter the OEM code for the trigger.
You will find a downloadable list of OEM codes in the sticky at the top of the forum.
 Hood