Hello Guest it is December 12, 2024, 09:41:20 PM

Author Topic: GOTO Z problem  (Read 16144 times)

0 Members and 1 Guest are viewing this topic.

Offline Roi

*
  •  3 3
GOTO Z problem
« on: June 14, 2023, 08:04:44 AM »
Hi,

I am nearly finished with my CNC-Mill and now got a problem.

I'm using Mach3 Version3.043


I was able to get everything started and Jogging and Homing works fine.

My X-Axis counts positive when jogging from left to right - the Homing Switch on the left side.
My Y-Axis counts positive when jogging from back to front - the Homing Switch on the back side.
My Z-Axis counts negative when jogging from up to down - the Homing Switch on the up side.

When I click on GOTO Z button, X and Y axes go to the right position and Z add distance.
See video - https://youtu.be/9rlcvkKHwGA

( for example – Starting position: X3Y3Z3 => click on GOTO Z => X0Y0Z6 => click on GOTO Z => X0Y0Z12 => click on GOTO Z => X0Y0Z24…..)
- I tried to change DirLowActive in Ports and Pins.
- I tried to change reversed and Home Neg in Home/Limits.
- I tried to update Mach3 Version from 3.041 to 3.043

Nothing works…


Please advise :-\

Thanks for yours help!

Offline TPS

*
  •  2,536 2,536
Re: GOTO Z problem
« Reply #1 on: June 15, 2023, 03:00:15 AM »
what is selected at

Config -> Safe_Z settings ?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Roi

*
  •  3 3
Re: GOTO Z problem
« Reply #2 on: June 15, 2023, 03:31:32 AM »
unchecked that already

Offline TPS

*
  •  2,536 2,536
Re: GOTO Z problem
« Reply #3 on: June 15, 2023, 05:10:01 AM »
that was the only idea i had, seems to be ok.

witch motion controller are you using?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Roi

*
  •  3 3
Re: GOTO Z problem
« Reply #4 on: June 15, 2023, 09:32:07 AM »
Problem solved  8).
I'm using BL-USBMach V2 controller.
I update the driver for the controller ( I put BL-UsbMach-V22.dll in Mach3/PlugIns) and it solved the problem.