Hi all,
Any help appreciated. I have up and running fine a BP clone, with Campbell Breakout board and Gecko 201's. But...the X and Y axes are reversed even thought the wiring is correct. When I correct that by either changing them in Mach3 or by swapping the wires, then the hot keys for jogging X and Y are reversed and the Mach three will let me change the designated hot keys in the software, but the changes are somehow not transmitted and the hot keys remain reversed. Even if I start from the other direction and correct the hot keys first, then the X and Y remain reversed when I run Mach3's sample programs, with the Y axis moving when a x move is commanded in the program. I have repeatedly re installed the xml file from campbell, and even re installed the latest revision of Mach 3.
Thanks in advance for any help, what am I missing?
Harvey Price