Hello Guest it is March 28, 2024, 04:29:43 PM

Author Topic: Mach3 Not saving the current tool number at shut-down  (Read 762 times)

0 Members and 1 Guest are viewing this topic.

Mach3 Not saving the current tool number at shut-down
« on: December 29, 2022, 04:12:16 AM »
Hi Everybody,

I run Mach3 on an OMNI router with a ATC spindle. All works fine except the system function, current tool number, is not stored during shut-down. I assume all system functions would be saved in the XML configuration file? What am I doing wrong?

Kind regards and thank you

Danie

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3 Not saving the current tool number at shut-down
« Reply #1 on: December 29, 2022, 06:17:22 AM »
try:

Config -> General Config -> Axis DRO properties -> Tool Selection persistent
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Mach3 Not saving the current tool number at shut-down
« Reply #2 on: December 29, 2022, 06:56:20 AM »
Thank you very much!

Regards Danie