Hello Guest it is December 01, 2024, 03:05:59 PM

Author Topic: Mach3 M10P1  (Read 13766 times)

0 Members and 1 Guest are viewing this topic.

Mach3 M10P1
« on: November 28, 2022, 03:33:07 PM »
Hi,
I am new to this forum, hope this is not a repeated many times question...

How to set laser power with M10 codes as one can with M3 S*  ?

Thanks

Offline Tweakie.CNC

*
  • *
  •  9,258 9,258
  • Super Kitty
Re: Mach3 M10P1
« Reply #1 on: November 30, 2022, 05:11:21 AM »
The M11P*/M10P* commands are only for turning the laser ON/OFF to set the laser power you need to do some additional work. The easiest method I have found for adjusting laser power is detailed in this & the other linked threads...  https://www.machsupport.com/forum/index.php?topic=12444.msg265104#msg265104
Hope this helps.

Tweakie.
PEACE
Re: Mach3 M10P1
« Reply #2 on: December 01, 2022, 02:10:21 PM »
Thank you.