Hello Guest it is December 05, 2023, 11:35:51 PM

Author Topic: mach3 xhc WHB04B mini lathe  (Read 308 times)

0 Members and 1 Guest are viewing this topic.

Offline frapo

  •  11 11
    • View Profile
mach3 xhc WHB04B mini lathe
« on: July 30, 2022, 03:51:47 AM »
hi i have the XHC WHB04B pendant and i like it very much,but there is one thing that i cant find out.
The z axe dro output are the same on pc and pendant,but my x axe shows different numbers,e.g- x axe on pc 100 mm  and the pendant shows 50 mm or is that normal.
Re: mach3 xhc WHB04B mini lathe
« Reply #1 on: July 30, 2022, 09:10:21 AM »
Lathe set to diameter mode but the pendant either isn't set or doesn't recognise it.  Mach 3 should say diameter mode under the dros.  Just ignore the pendant.