Hi

I have installed the Manual Lathe Screen (Mach4_Manual_Lathe.m4prof).
If I switch from AUTO screen to Manual screen, there is always
the blue toolpath window overlayed as shown in attached pic

BR
Gerhard

And how do you install this screen?

Hi
have problem solved
in toolpath config was a checkbox
„use frame“ or so
If I uncheck it, the toolpath in the manual screen was disappeared
BR
Gerhard

But how do install this screenset or screen,

Hi,

But how do install this screenset or screen,

Typically to change a screen set requires that Mach4 is running and with the <View> tab choose the <Load Screen> item and chose from the available screen sets. If you select a new screen set
when you shut down Mach your screen set preference will be updated courtesy of the ScreenUnLOad script.

Second way to do it is to create a new profile whereon you can select a particular screen set.

Craig