The strange thing about this is that it hasn't been like this before.
If I issue a command to move z-0.5 it moves z-0.5 and showed z-0.500. For several years there was no rounding error!
How can I get rid of these errors?
I issued, right now G01 Z-0.500 and it shows Z-0.4982
That is a "rounding error" of 3.6/1000
I believe this is to much, and since it never been seen before I think there is a problem and I would like it to be solved!
In my work with Mach3 I rely on the numbers in the display and I work with them for calulations to next step...