Hello Guest it is May 28, 2024, 03:45:24 PM

Author Topic: Quick threads  (Read 1527 times)

0 Members and 1 Guest are viewing this topic.

Quick threads
« on: February 04, 2022, 12:18:45 PM »
I've downloaded this wizard and have been reading the documentation, but I find it slightly confusing.  Just to be clear, when it says that "clockwise spindle rotation will cut a right-hand thread", is this clockwise as seen from the left hand side of the headstock, which I think is the convention for lathes?  This of course is CCW as seen by the operator standing in front of the machine.

Thanks, John.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Quick threads
« Reply #1 on: February 04, 2022, 06:36:49 PM »
Have not used that wizard in years. I have some info about its use in Threading On the Lathe  - Mach 3 Turn page 37 to page 39.
Make special note of the problem pointed out on page 39 about the program THREADS included with Quick Threads.

RICH
Re: Quick threads
« Reply #2 on: February 05, 2022, 05:03:38 AM »
Thanks Rich, maybe I'll stick with the usual turning wizard!