Hello Guest it is March 28, 2024, 08:32:10 AM

Author Topic: error G31 Probing Arrays  (Read 4389 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: error G31 Probing Arrays
« Reply #10 on: February 02, 2022, 02:38:51 AM »
var 121 and 122 are nowhere calculated
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: error G31 Probing Arrays
« Reply #11 on: February 02, 2022, 05:12:29 AM »
Oops!  How true!

This macro seems to be a complete mess.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: error G31 Probing Arrays
« Reply #12 on: February 02, 2022, 07:19:10 AM »
as mentoined earlier: no ideas what it will/should do
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: error G31 Probing Arrays
« Reply #13 on: February 03, 2022, 01:51:36 PM »
TPS thanks for the reply, I state that I do not understand programming, the array is taken from the site under download / mach tool box
in theory it should probe the outside of a piece, I don't know if I'm having problems or it's the macro, too bad it would have been useful !!

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: error G31 Probing Arrays
« Reply #14 on: February 04, 2022, 02:11:05 AM »
this script will not probe a outside of a part.

may this:

https://www.youtube.com/watch?v=CsXjI1998ik
http://www.craftycnc.com/probe-it-wizard-mach3/

is what you are looking for.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: error G31 Probing Arrays
« Reply #15 on: February 07, 2022, 10:10:38 PM »
Well it probed parts for about 10 years inside and out BUT the code in the toolbox may not be a good copy of the script.

(;-) TP

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: error G31 Probing Arrays
« Reply #16 on: February 08, 2022, 10:47:56 PM »
I take that back it is over 17 years old now. I drug out the old PC that ran it and pulled off a copy for you to try.  Notice the last modify date 2004 (;-)
(;-) TP
Re: error G31 Probing Arrays
« Reply #17 on: February 09, 2022, 01:51:20 PM »
thanks BR549 I tried it works fine !!!!