Hello Guest it is March 28, 2024, 08:17:11 PM

Author Topic: Mach3 Demo - printer port working?  (Read 3475 times)

0 Members and 1 Guest are viewing this topic.

Mach3 Demo - printer port working?
« on: October 18, 2007, 06:42:21 PM »
Hi,

     Currently have Mach2 and am trying out Mach3 demo prior to buying. Could anyone tell me if the demo of Mach3 will actually control stuff through the printer port or can it only simulate running programs? I'm not getting any pulses on the port.

Thanks,

Lindsay

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Mach3 Demo - printer port working?
« Reply #1 on: October 18, 2007, 06:47:29 PM »
Mach3 demo will run your machine. See if you have the right ports selected in Ports and pins.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Whacko

*
  •  239 239
  • Happy Days
    • View Profile
Re: Mach3 Demo - printer port working?
« Reply #2 on: October 19, 2007, 09:29:29 AM »
Is it on the same PC? If not, try running the alternative driver .bat file.

Whacko.
Nothing's impossible