Hello Guest it is June 13, 2024, 01:28:16 PM

Author Topic: Setting a toolpath to Turning control problem.  (Read 3867 times)

0 Members and 1 Guest are viewing this topic.

Offline Tarak

*
  •  229 229
    • View Profile
Setting a toolpath to Turning control problem.
« on: October 12, 2007, 05:54:49 PM »
Hi Guys, any idea why when I set a toolpath display to Turning control, it won't stay checked as turning control, BTW I'm using screen4.
So obviously it won't display as turning control, or am I missing something?
On that note, how can I use the toolpath to display as X Ø, Z left to right and A as the chuck, or is this exactly what the turning control does?
« Last Edit: October 20, 2007, 06:44:02 AM by Darc »

Offline drew

*
  •  79 79
    • View Profile
Re: Setting a toolpath to Turning control problem.
« Reply #1 on: October 19, 2007, 11:41:19 PM »
I have converted a mill screen to a lathe screen that has 5 pages with toolpath displays. None of the toolpaths stay checked but 3 of then work fine 2 of them show nothing.  My problem could be the transparent layer in the frame but I not sure.
Drew
If I had something important to say it would be here.