Hello Guest it is March 28, 2024, 03:28:29 PM

Author Topic: Mach3 Z-Axis decreases with subsequent iterations  (Read 596 times)

0 Members and 1 Guest are viewing this topic.

Mach3 Z-Axis decreases with subsequent iterations
« on: March 23, 2021, 06:46:14 PM »
Mach 3 Z-Axis decreases in cut value with subsequent cuts in same program and does not return to zero height when complete.  Each cut subsequent progressively gets lower in the work.
Re: Mach3 Z-Axis decreases with subsequent iterations
« Reply #1 on: March 24, 2021, 12:17:02 AM »
fixed problem by tightening the other two set screws that were missed.  4 set screws total on coupler. :o