Hello Guest it is May 14, 2021, 09:59:20 AM

Author Topic: Mach4 + ESS + EasyServo = Z axis problem  (Read 342 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach4 + ESS + EasyServo = Z axis problem
« Reply #10 on: March 19, 2021, 02:10:56 AM »
I will try to apply filtration. My colleague will start at 200ms, so I'll test. We'll see. Thanks for the tip:)
Re: Mach4 + ESS + EasyServo = Z axis problem
« Reply #11 on: March 24, 2021, 02:58:07 AM »
to my knowledge the easy servo models are stepper, no servo.
I have Leadshine servos on the lathe, L5 series.