Hello Guest it is August 09, 2022, 04:08:59 PM

Author Topic: need help offset 5-axis cnc  (Read 299 times)

0 Members and 1 Guest are viewing this topic.

need help offset 5-axis cnc
« on: March 09, 2021, 07:30:51 AM »
Hello everyone, I bought a 5-axis attachment for my small 3-axis machine and faced the problem of adjusting the offsets in the rotary axes. How can I do this without sensors (if I put sensors, they will be triggered when the axis is fully rotated)? I found a video of a similar setting on YouTube, could someone explain to me how to do this (the author of the video is silent). https://www.youtube.com/watch?v=9_JEFLKDehk

Offline TPS

  •  2,315 2,315
    • View Profile
Re: need help offset 5-axis cnc
« Reply #1 on: March 09, 2021, 10:12:17 AM »
if you put a sensor for homing this will not affect during normal run.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.