Hi, I’m migrating from a Duet-based setup to either Mach3 or Mach4. In order to evaluate, I have loaded and configured Mach3 Demo successfully on my Windows 8.1 Pro laptop and got my OpenBuilds CNC working with it very well. So far so good.....
However, when I tried to repeat the process with Mach4 Demo (Mach4Hobby_Installer-4.2.0.4517) on my Windows 8 laptop the GUI looks awful. The buttons do have any gradient, the fonts are odd and text fails properly to wrap within the button areas.
I also loaded it onto another Windows 10 machine and got same display (virtual machine on a very modern iMac running under Parallels). I attach screenshots below (possibly....Forum doesn't seem to allow load of .jpgs....despite attaching them....).
Both setups were preceded by the SCU routine.
I selected the ‘wxrouter.set’ for my profile. But on switching to other ’sets’ the problem persists.
On the W8 machine I have tried every reasonable variation of screen resolution and % of ‘enlargement’ - no difference.
Does anyone cleverer than me know why it doesn't display properly.
I stress that all other Windows stuff displays perfectly on both machines (inc Mach3).
Any help gratefully received.
Simon