Hello Guest it is March 28, 2024, 05:05:35 PM

Author Topic: UC100 G02 will not work  (Read 5503 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: UC100 G02 will not work
« Reply #10 on: February 27, 2021, 02:06:25 AM »
Config -> General Config -> I/J Mode Abs/Inc ?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: UC100 G02 will not work
« Reply #11 on: February 27, 2021, 01:34:45 PM »
Naturally that was the first thing I tried.
Re: UC100 G02 will not work
« Reply #12 on: February 27, 2021, 09:15:12 PM »
I've gotten it to somewhat work, by changing the post processor in SheetCam to "MACH THC with scriber" however, I must not have the appropriate options turned on in the post processor, the machine continues to climb in the Z-axis with every retraction about.