Hello Guest it is April 11, 2021, 12:30:50 AM

Author Topic: Using aspire and mach 3 (total NooB)  (Read 54 times)

0 Members and 1 Guest are viewing this topic.

Using aspire and mach 3 (total NooB)
« on: February 20, 2021, 09:19:00 PM »
I have Aspire, drew a test with a few designs and exported it. I cant get it to show but some of the drawing and it is skewed to upper right of center (view in Mach 3) I used "Mach 2/3 ARCH-inch" to export the file.

Second test i used same parameters, made sure all tool paths were selected and out of a 4 letter word (STOP) all i got was a "ST" and i had to seriously play with the view window (in Mach 3) to even see that.

My problem is i only have a little time here and there to play with it and its really frustrating. I hope it is something simple, i know I'm doing something wrong but just don't know what it is yet.
Thanks for any help