Hello Guest it is July 17, 2019, 07:20:33 PM

Author Topic: Modifying Z axis  (Read 2250 times)

0 Members and 1 Guest are viewing this topic.

Modifying Z axis
« on: October 05, 2007, 08:16:12 AM »
Hi folks,
Is there any way to change the way of controlling Z axis. This is what I need: when Mach needs to change value of Z, firstly to Deactivate Output(1), and then, after taking desired position, to Activate Output(1) again.
It is very hard to edit G-code all the time and entering rows before and after moving Z.
Another question: is there something about SystemWaitFor(*********) that I don't know, 'cause I build some M6Start script which has to wait each tool to touch inductive sensor and then to take it back, but it doesn't seem to be working
Cheers,
Dejan

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Modifying Z axis
« Reply #1 on: October 06, 2007, 03:46:59 PM »
have a look at the Brains, should be able to make one up to activate/deactivate your outputs by looking at the DRO.