Hello Guest it is November 27, 2021, 01:05:34 AM

Author Topic: Can I add to the Tool Library??  (Read 2178 times)

0 Members and 1 Guest are viewing this topic.

Can I add to the Tool Library??
« on: July 03, 2020, 09:51:51 PM »
Hi,
I use MillWizard alsmost daily, its so handy for doing small jobs.

I use 0.5mm, 0.8mm and 1.5mm endmils alot. The 0.8mm and 1.5mm are four flute and the 0.5mm
are two flute.

When I go to do a new job you have to select the tool but none of these endmills occurr in the tool library.
I've not found a way to include my go-to tools in the library. Is there some technique or manipulation that I'm
missing?

Craig
My wife left with my best friend...
     and I miss him!

Offline Graham Waterworth

*
  • *
  •  2,419 2,419
  • Yorkshire Dales, England
    • View Profile
Re: Can I add to the Tool Library??
« Reply #1 on: July 05, 2020, 09:18:30 AM »
The tool table is in the config menu
Without engineers the world stops
Re: Can I add to the Tool Library??
« Reply #2 on: July 05, 2020, 03:06:12 PM »
Hi,
kool, thankyou.

Craig
My wife left with my best friend...
     and I miss him!