Hello Guest it is March 28, 2024, 01:36:27 PM

Author Topic: Thinkpad T20 laptop problem  (Read 3319 times)

0 Members and 1 Guest are viewing this topic.

Thinkpad T20 laptop problem
« on: September 26, 2007, 02:53:25 PM »
My first post. I had this problem last time I had to reload windows and Art was able to solve it with an address change which of course I have lost and forgotten.
Problem is my printer port is not outputting any pulses. Bios and windows report lpt1 is at hex 03bc. I put this in the config and enable but of course nothing.
Any ideas?
Tnx
Tp

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Thinkpad T20 laptop problem
« Reply #1 on: September 26, 2007, 03:26:49 PM »
only thing I can think of at the moment is you have the letter O instead of a Zero.
 If you attach your xml we can have a look and see if we notice anything.
Hood
Re: Thinkpad T20 laptop problem
« Reply #2 on: September 26, 2007, 06:20:23 PM »
Checked the ports again. The numbers look ok
I think I attached the file

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Thinkpad T20 laptop problem
« Reply #3 on: September 26, 2007, 06:24:21 PM »
Look on the ports and pins then motor outputs page, you dont have Port 1 in the boxes for each of your step and dir pins.
Hood
Re: Thinkpad T20 laptop problem
« Reply #4 on: September 26, 2007, 07:33:13 PM »
That got her going
Thanks
Tom