Hello Guest it is March 28, 2024, 04:51:21 PM

Author Topic: Need help for motor tuning  (Read 3707 times)

0 Members and 1 Guest are viewing this topic.

Need help for motor tuning
« on: November 17, 2005, 02:27:04 AM »
 Hi,
we are new users of Mach software. We have problem with one axis on our plasma cutting mashine. On this axis we have small ratio portion and motor need only few steps (7) to make one unit (1mm). I case that we using these number of steps we have very noisy moving. Some other software like TurboCNC or EzCNC have smooter moving on same machine.
How we can solve this problem?

Thanks
Re: Need help for motor tuning
« Reply #1 on: November 17, 2005, 06:39:03 AM »
please check the pulse width and accel settings

Hope that helps
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com