Hello Guest it is March 29, 2024, 03:13:01 AM

Author Topic: Pierce delay  (Read 1015 times)

0 Members and 1 Guest are viewing this topic.

Pierce delay
« on: February 17, 2019, 01:56:54 PM »
Can anyone get a pierce delay under 1 second, my mach 3 will not respond to anything like .9 .8 .7 and so on.
Only with 1 second or more it reads it.
It was working and reading under 1 second until I installed a smooth stepper.
I have tried checking and unchecking dwell in milliseconds.
I put one second in sheet cam it works I put one second in mach 3 and it works, then I try .9 and it moves the machine instantly, no delay.
I cant be the only one with this problem but looks like it so far.
Help please....

Offline ZASto

*
  •  423 423
    • View Profile
Re: Pierce delay
« Reply #1 on: February 17, 2019, 08:25:59 PM »
If you have checked delay in miliseconds, you should save your settings and restart mach.
Then you put delay in miliseconds,i.e. 600, 700, 800, 900, ...
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.