Hello Guest it is March 28, 2024, 05:36:34 AM

Author Topic: XHC ethernet controller & PROMA 150 THC  (Read 811 times)

0 Members and 1 Guest are viewing this topic.

XHC ethernet controller & PROMA 150 THC
« on: September 18, 2020, 03:21:07 PM »
Hello, i buy purchased XHC MK3-ET controller and im having a problem.
I cannot get it to run THC in Mach3 Plasma mode.
Im using PROMA THC 150.
Mach3 is reading inputs in diagnostic(ARC OK, UP, DOWN) but Z axis doesn't move or when it does, its going random and passing min max values.
I read that cnc controller for that function should have a THC support.
Is it possible to write some kind of script/macro to get it running...
Thx

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: XHC ethernet controller & PROMA 150 THC
« Reply #1 on: September 19, 2020, 02:10:10 AM »
Short answer NO.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: XHC ethernet controller & PROMA 150 THC
« Reply #2 on: September 19, 2020, 04:53:17 AM »
Short answer NO.

Will replacing THC 150 with SD be a good idea?

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: XHC ethernet controller & PROMA 150 THC
« Reply #3 on: September 19, 2020, 06:26:26 AM »
I have a feeling that it is the XHC controller that you will need to replace  :'(

Tweakie.
PEACE