Hello Guest it is August 04, 2020, 05:03:13 AM

Author Topic: IMS im2000f - Vision 2448 router  (Read 99 times)

0 Members and 1 Guest are viewing this topic.

IMS im2000f - Vision 2448 router
« on: April 20, 2020, 10:15:39 AM »
Got Vision 2448 router with old controller that use IM2000F chip.
Can I somehow use Mach3 or other soft with it?

Offline Graham Waterworth

*
  • *
  •  2,113 2,113
  • Yorkshire Dales, England
    • View Profile
Re: IMS im2000f - Vision 2448 router
« Reply #1 on: April 20, 2020, 08:22:31 PM »
Mach3 can drive step and direction through a parallel port or drive various motion controllers as long as the plug in is available.  If your machine has Stepper motors and drives the its not usually a problem, if its servo motors and drives then it can be more complicated as some are 0-10V analogue some a pwm and some are step and direction.

Without engineers the world stops
Re: IMS im2000f - Vision 2448 router
« Reply #2 on: April 21, 2020, 03:43:37 AM »
Yes it has stepped motors 2V/5,6A. I haven't found plugin.