Hello Guest it is April 19, 2024, 02:09:27 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach4 Minor Stops after each GCode Line  (Read 694 times)

0 Members and 1 Guest are viewing this topic.

Offline MB12

*
  • 3 3
    • View Profile
Mach4 Minor Stops after each GCode Line
« on: April 25, 2020, 05:14:56 AM »
My Machine does a minor stop (propably about a few ms) after each Line of GCode. I can not see it in the moves the machine does but you can hear, that the stepper motors stop moving for a moment. I use Mach 4.2.0.4466 with ESS in my machine. My machine did not show that behaviour with Mach3.

Does anyone have an idea how to get rid of that?

Marius
Logged

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Re: Mach4 Minor Stops after each GCode Line
« Reply #1 on: April 25, 2020, 07:32:44 AM »
Is CV turned off
Logged
Without engineers the world stops

Offline MB12

*
  • 3 3
    • View Profile
Re: Mach4 Minor Stops after each GCode Line
« Reply #2 on: April 26, 2020, 05:29:40 AM »
Yes, the machine is set to exact stop
Logged

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Re: Mach4 Minor Stops after each GCode Line
« Reply #3 on: April 26, 2020, 06:48:40 PM »
That is why its pausing, set it to CV on G64 or click the button on screen and remove any G61 from your code.
Logged
Without engineers the world stops

Offline MB12

*
  • 3 3
    • View Profile
Re: Mach4 Minor Stops after each GCode Line
« Reply #4 on: April 27, 2020, 11:42:46 AM »
That solved my Problem!  :)

Thank you so much!
Logged
Pages: 1   Go Up
« previous next »