Hello Guest it is March 29, 2024, 05:22:08 AM

Author Topic: Modifying Buttons in Mach 3,  (Read 1363 times)

0 Members and 1 Guest are viewing this topic.

Modifying Buttons in Mach 3,
« on: March 17, 2020, 07:14:12 AM »
Good Day all,

I am looking for some help in re configuring my mach 3 screen. Currently I have X, Y, Z and A/4. I have an issue with my CNC at this moment and trying to locate the fault.

I have swapped my drive for the A into Z position and want to disable the A/4 from the whole process of Ref all etc. I have turned it off in all tabs of ports and pins Just need to stop it calling it when i hit the ref all.

Thank you kindley

Regards Tom

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Modifying Buttons in Mach 3,
« Reply #1 on: March 17, 2020, 08:16:03 AM »
Hi Tom,

Download OEM codes from Members Documents here; https://www.machsupport.com/forum/index.php?topic=9312.0

Within Mach3 click;   Operator / Edit Button Script, click on the flashing Ref All button. Change and save the script as required.

Tweakie.
PEACE
Re: Modifying Buttons in Mach 3,
« Reply #2 on: March 17, 2020, 09:48:05 AM »
Thank you for your link made a whole lot more sense.

Have a good day :)