Hello Guest it is March 29, 2024, 08:23:30 AM

Author Topic: Cadlink Signlab 7.0  (Read 2892 times)

0 Members and 1 Guest are viewing this topic.

Cadlink Signlab 7.0
« on: April 04, 2006, 04:28:31 PM »
I am retrofitting a home built router and using Signlab to generate my cut files. The router has 3 stepper motors and I am using Mach 3 to run the router. I have successfully output a polylineDXF file from Signlab and cut it on the router. The one feature that I can't figure out how to accomplish is the S-Sweep to cut out the background and leave the border and the letters for a sign. Does anyone have any experience on what type of command and what type of output file that works best for this operation?
Re: Cadlink Signlab 7.0
« Reply #1 on: April 05, 2006, 09:54:38 AM »
There are others in here that should be able to help... I cut parts for machines so I am no help :(
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com