Hello Guest it is March 29, 2024, 09:17:56 AM

Author Topic: Spindle problem  (Read 2503 times)

0 Members and 1 Guest are viewing this topic.

Spindle problem
« on: September 19, 2007, 02:24:03 AM »
When I start spindle through relay control it run for some time and then it stops if I do nothing on mach3 screen. When I start doing something on screen e.g. jogging then spindle starts again. Plaease help me to sole this problem.

vmax549

*
Re: Spindle problem
« Reply #1 on: September 19, 2007, 07:52:23 AM »
Sounds like your computer is going into sleep mode or power conserve mode. when you use the mouse it wakes up. Disable all power conservation modes. (;-) TP