Hello Guest it is September 16, 2024, 04:44:37 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Multiple Profile with Tool Table  (Read 1340 times)

0 Members and 1 Guest are viewing this topic.

Offline ThomasCNC

*
  • 2 2
Multiple Profile with Tool Table
« on: November 18, 2019, 10:12:40 AM »
Hello,

I Need little Help.
Im Tom i use Mach3 some years on a MAHO700.
Now i create some New Mill Profile and want use the same Tool Table.
It is possible to config? Where can i config this?

Greets and Sorry for my English
Logged

Offline TPS

*
  • 2,528 2,528
Re: Multiple Profile with Tool Table
« Reply #1 on: November 24, 2019, 08:03:14 AM »
tooltabel is allways stored separat in c:\Mach3\macros\profile Name\Tools3.dat

so only copy/paste will work, or create VB script Export/inport the tooltable.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline ThomasCNC

*
  • 2 2
Re: Multiple Profile with Tool Table
« Reply #2 on: November 25, 2019, 09:41:18 AM »
I get it with Hardlink

mklink /H C:\Mach3\macros\Plasma\tools3.dat C:\Mach3\macros\Mach3Mill\tools3.dat


That works good
Logged
Pages: 1   Go Up
« previous next »