Hello Guest it is July 01, 2022, 04:16:22 AM

Author Topic: mach3turn fusion360  (Read 369 times)

0 Members and 1 Guest are viewing this topic.

mach3turn fusion360
« on: September 21, 2019, 04:08:06 AM »
i need a bit of help
my fusion 360 pp if i ask for canned cycle generates g78 . unchecked g32

i would prefer the canned cycle g76
are there any changes i can make or does someone have a mach3turn  fusion360 post processor that generates g76 threading code