Hello Guest it is April 18, 2024, 06:52:27 PM
Profile Guest
« previous next »
Pages: « 1 2 3 4   Go Down

Author Topic: mach3 turn threading issue  (Read 4676 times)

0 Members and 1 Guest are viewing this topic.

Offline Overloaded

*
  • *
  • 4,921 4,921
    • View Profile
Re: mach3 turn threading issue
« Reply #30 on: September 19, 2019, 07:58:55 AM »
Read all the info describing the encoder resolution in relation to the speed of the signals.
And, the notes about QUALITY high speed onto-couplers that some BoB's utilize and so many other lower quality ones do not.
Logged

Offline BR549

*
  • 6,965 6,965
    • View Profile
Re: mach3 turn threading issue
« Reply #31 on: September 19, 2019, 08:11:58 AM »
I would keep teh Pulse count low as in 100-400 PPR and yes teh ABZ is what you want.  as to wiring it up I have no idea how your machine is wired. Only you will know that.

(;-) TP
Logged

Offline BR549

*
  • 6,965 6,965
    • View Profile
Re: mach3 turn threading issue
« Reply #32 on: September 19, 2019, 08:20:25 AM »
When you get the encoder set up TRY teh Mach3 G32/G76 routines to see if they work. The testing I did with this was 3 years ago.

(;-) TP
Logged

Offline chessie

*
  • 44 44
    • View Profile
Re: mach3 turn threading issue
« Reply #33 on: September 19, 2019, 12:36:59 PM »
thanks for the help

i just updated the firmware for the uc400eth . ;D

its working and threading lovely now using the hall effect proximity switch for some reason . i can now have the spindle sync ticked in mach3  and it works

Logged
Pages: « 1 2 3 4   Go Up
« previous next »