Third party software and hardware support forums. > PoKeys

Pokeys57CNC with AMB 1050 FME-1 DI

<< < (2/2)

vincentb62:
To help , i found the solution.

Connect brown wire to PSU 24v+, green to 0-10v pin and you have to connect 3 GND :
- 24V PSU GND
- 0-10v GNDi
- GND from AMB spindle speed control (white wire)



Configure Mach4 with step to step tutorial from Pokeys57CNC

And all works well now :)

AlexRu:
You were faster then I :-)

here is the schematic for pokeys and the AMB.
https://im.ge/i/1DhY1C

You need 2 dedicated power supplies. One for pokeys (6-28V) and one for AMB (24V). You have to be sure, that GND/0V is NOT interconnected between the two power supplies.

For mach3 set things, like in this post: https://www.machsupport.com/forum/index.php?topic=33174.msg230383#msg230383

Map PWM to DRO 817 in %, set Multiplier to 0.00417
https://im.ge/i/1DhV7r

For mach4 I have no info. Still use mach3.

Greetings

Alex

Navigation

[0] Message Index

[*] Previous page