Hello Guest it is September 29, 2020, 06:56:48 PM

Author Topic: After homing axis don't back off Switches  (Read 4364 times)

0 Members and 1 Guest are viewing this topic.

Re: After homing axis don't back off Switches
« Reply #10 on: July 29, 2019, 02:52:49 PM »
Check to be certain that the limits and homes are mapped to the same input. For example, if X limit is mapped to Port 11, Input 1, then the X Home must also be mapped to Port 11, Input 1. I made the mistake of using a jumper to share the physical signal for X limits and X home instead of sharing the Port and had the same problem.