Hello Guest it is March 29, 2024, 09:42:21 AM

Author Topic: Mach4, Home backoff limits  (Read 2225 times)

0 Members and 1 Guest are viewing this topic.

Offline Boots

*
  •  17 17
    • View Profile
Mach4, Home backoff limits
« on: June 30, 2019, 08:20:56 PM »
When “Reference  all home” the machine moves to Z Home switch, triggers it then does not back off. How can we change the Homing routine to move off the homing switch?? In MAch4 I tried increasing the offset but it does not work.

Offline Mauri

*
  •  328 328
    • View Profile
Re: Mach4, Home backoff limits
« Reply #1 on: June 30, 2019, 10:01:37 PM »
Boots,
Below are my settings as an example.
Regards,
Mauri.

Offline Boots

*
  •  17 17
    • View Profile
Re: Mach4, Home backoff limits
« Reply #2 on: July 01, 2019, 12:46:45 AM »
Hi Mauri,
Thanks for the reply - my setup is close to your setup; the only difference is the negative value in the soft limits. I will try that.

Thanks, Boots-2b1