Hello Guest it is March 28, 2024, 08:19:31 PM

Author Topic: Cycle start button on panel?  (Read 1385 times)

0 Members and 1 Guest are viewing this topic.

Cycle start button on panel?
« on: December 23, 2018, 06:24:56 PM »
I tried to search the forum but the search funtion is broken.

I would like to add an E-stop and cycle start button to the control panel on my lathe. The E-stop seems easy but the cycle start isn't as clear. I found this in the Mach3 docs.

Enable and define OEM Trigger inputs if you want electrical signals to be able to call OEM
button functions without a screen button needing to be provided.

I assume i would use one of these inputs? I can wire the buttons and configure the inputs but I cant find a way to define the chosen OEM input to trigger a Funtion "0" or cycle start.

Am I on the right track? There is no further info in the docs about OEM inputs. Is a Cycle start button possible?
Re: Cycle start button on panel?
« Reply #1 on: December 23, 2018, 06:30:35 PM »
Found it!

It's in the system hotkeys setup. I have some testing to do.
Re: Cycle start button on panel?
« Reply #2 on: July 11, 2019, 01:58:12 PM »
Hola seƱores, alguien ha podido conectar y configurar bien los finales de carrera de esta tarjeta???, por favor ayuda. gracias.