Hello Guest it is July 22, 2024, 05:17:34 PM

Author Topic: UC300  (Read 3170 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

  •  2,509 2,509
Re: UC300
« Reply #10 on: June 27, 2019, 02:38:42 PM »
not realy sure what you concret looking for.

but after reading all this i woul also  give CSMIO-M give a try.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: UC300
« Reply #11 on: June 28, 2019, 04:04:47 PM »
to date none of the CNCDrive boards that do have a Mach4 plugin (UC100, UC300, and UC400) have many realtime supports
like backlash comp, lathe threading, realtime THC, laser vectoring/rastering or spindle PID.
It seems unlikely therefore that CNCDrives new controller AXBB-E will have them either if and when CNCDrive get around to
making a Mach4 plugin for it.

CNCDrive boards preform very capably with Mach3 and have a large following. Their Mach4 plugin is still somewhat behind
the curve however.

'I enjoy sex at 73.....I live at 71 so its not too far to walk.'