Hello Guest it is February 27, 2021, 08:25:39 PM

Author Topic: Homing Slaved Axis?  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

Re: Homing Slaved Axis?
« Reply #10 on: June 12, 2019, 02:19:05 AM »
Yes, the proximity sensors seem to be functioning as they should in the diagnostics tab and I'm running version R2.63

Offline ger21

*
  • *
  •  6,289 6,289
    • View Profile
    • The CNC Woodworker
Re: Homing Slaved Axis?
« Reply #11 on: June 12, 2019, 06:45:21 AM »
Any reason for running a 10 year old version?

Try the latest version, 3.043.062.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Homing Slaved Axis?
« Reply #12 on: June 13, 2019, 06:14:44 AM »
I've just installed the latest version but it's still running the same.

Offline ger21

*
  • *
  •  6,289 6,289
    • View Profile
    • The CNC Woodworker
Re: Homing Slaved Axis?
« Reply #13 on: June 13, 2019, 06:53:23 AM »
Try removing the license file and running in demo mode, and see if it works.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Homing Slaved Axis?
« Reply #14 on: June 15, 2019, 01:25:18 AM »
Thanks, I've just tried that, and it's still having the same issue.