Hello Guest it is March 28, 2024, 04:19:09 PM

Author Topic: Spindle Relay Configuration Questions  (Read 5880 times)

0 Members and 1 Guest are viewing this topic.

Re: Spindle Relay Configuration Questions
« Reply #20 on: May 02, 2019, 10:03:29 AM »
You should connect the BOB ONLY to a 12-24V power supply.
and DO NOT CONNECT a USB CABLE TO THE PC!

(i will explain to you why via PM if you want to know)

Yes, I would like to know.  While I appreciate you sending me the BoB manual it doesn't do a good job of explaining the boards functions.
Tom

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Spindle Relay Configuration Questions
« Reply #21 on: May 02, 2019, 12:23:29 PM »
Currently my spindle direction is controlled with a switch (FWD-OFF-REV) and speed is with a potentionmeter.

so there must be a Kind of Controller, maybe it has got control Inputs to Switch ON/OFF instead of switching
the powersupply. just a thought.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.