Hi, I hope you can help me with this problem, since I bought the machine I have not been able to use it correctly, nothing I do puts the coordinates of the machine at 0, and I have never been able to configure the soft limit.

This is the hardware used by my machine and the machine model:
NVUM CNC Controller
TB6600 Stepper Driver
CNC Workbee 1000mm x 750mm
no switch limit installet

Windows-10


I send you a screenshot of my current configuration to see if anyone sees any errors that I can correct and thus be able to configure my machine correctly

this its the rest of the picture

Hi Eduardo,

Unfortunately Novusun is one of the businesses listed in our Hall of Shame for Mach3 Licence violation. As a result this forum does not support assistance with any of it's products.

This thread refers;  https://www.machsupport.com/forum/index.php?topic=24331.msg171954#msg171954

Tweakie.

Thanks for the reply Tweakie as I took some time and I was about to post some good help for this user.

Eduardo,
Consider doing what is right since it has many benefits!
 
RICH