Hello Guest it is May 17, 2022, 05:32:00 PM

Author Topic: Unable to reverse direction of motor  (Read 123 times)

0 Members and 1 Guest are viewing this topic.

Unable to reverse direction of motor
« on: October 12, 2021, 10:41:26 AM »
Hi, for some reason I am unable to reverse the direction of the motors on all axis. I go to homing page on Mach3, click the green tick to Red Cross press enter. And the motor just travels in the same direction. So at the moment the x+ and x- are around the wrong way, and it’s the same on the y axis. Any idea what is going wrong. Thanks,

Online Graham Waterworth

  • *
  •  2,454 2,454
  • Yorkshire Dales, England
    • View Profile
Re: Unable to reverse direction of motor
« Reply #1 on: October 12, 2021, 06:00:27 PM »
If you are using stepper motors just swap 2 motor wires.  Swap A+ with A-   OR   swap B+ with B- this will reverse the motor direction.
Without engineers the world stops